Dustproof 1250mm Dia Conveyor Drum Pulley Smooth Steel Surface

Dustproof 1250mm Dia Conveyor Drum Pulley Smooth Steel Surface

Belt Conveyor Drum Pulley Drive Head Pulley Gravity Feed Conveyor Roller

According to the bearing capacity, the Conveyor Drum Pulley is divided into three types: light, medium and heavy. The same Conveyor Drum Pulley has several different shaft diameters and center spans for selection; the surface of the Conveyor Drum Pulley has smooth steel surface, herringbone and diamond pattern rubber coating. The chevron pattern rubber surface has a large friction coefficient and good drainage, but has directionality. The chevron tip should be consistent with the running direction of the conveyor belt during installation. The two-way conveyor should adopt a diamond pattern. When used in important occasions, it must be covered with vulcanized rubber; when used in flame-retardant and explosion-proof occasions, response and explosion-proof measures should be adopted. The bearing seat is divided into integral type and split type, and all oil cups are used. , Conducive to grease lubrication. Our factory also produces more idler related products, which can fully meet your needs.

Driving pulley provides the driving force for the conveyor. In order to increase pulley life and traction, it often has a larger diameter than other pulleys.

Driven pulley is also called as redirection pulley, which is used to redirect the conveyor belt or press it tightly.

The Head Pulley gives motion to the conveyor belt. The driving pulley can be at the head end or at the tail end, depending on the layout of the conveyor, space available and loading conditions. It is the head end where generally the belt discharges the carried material and return for loading. Besides, we offer these Head Pulleys at the affordable price range.

Product Paramenters

Pulley Feature:

1. The belt conveyor drum/ pulley is made by large seamless steel.

2. Use flame cutting machine to precisely cut tube.

3. Weld the pulley inner disc with professional welding machine.

4. Weld the shaft sleeve and disc with the positioner.

5. Process the outside circle with large drum lathe to guarantee the even wall thickness.

6. We select #45 round steel and sleeve to ensure the concentricity and reduction for the eccentric shaft force.

7. Equip the inner bearing enlargement device to avoid bearing damage from beating.

8. We will make the static balance inspection when the belt speed exceeds 2.5m/s.

9. We can produce different type,different standard pulley according to customers’ request.